The head badge is a lovely gold & red shield, torch on top, Falcon in script on a red background, with a falcon in the center. The high end frames have a decal, on the rear stay that say in script 'Designed by Ernie Clements.' Later bikes have a more subdued brush script 'Falcon' on the down tube only. If you search for 1234, you will only find bikes with serial numbers of 1234 and serials close to that - not a bike with serial number of 12345689. Okay, fine, so maybe there are a few bikes without serial numbers, but this is rare and typical only on hand made bikes or really old bicycles. Search for your bike here. Falcon benefited from their greater buying power, but Casket bought a German bicycle maker, ran into serious problems, nearly went bust, and 'merged' with EFG (Oct/Nov 1995) to form Tandem PLC, who continued to sell Claud Butler and Falcon cycles. I'm not sure whether the Holdsworth name was retained or sold, I suspect it was sold about now. The system protects your bicycle frame, forks and battery, plus the Datadots® are used to mark many of your electric and non-electric cycle components. Page 27 Number, found on the label attached to your frame, and the Datatag Stealth Etch Code marked on the frame, forks and battery. (Only visible in UV light). You also need the bike Serial.
Here is an email I got from an actual employee of GT:
If the bike frame was manufactured at the Santa Ana CA facility, the first three or four digits of the serial number should be letters abbreviating the model or size of the frame such as 'XL', 'XXL', CR24, or something like that.
The next part of the serial number is eight numeric digits. The first four numbers should be a two digit month followed by a two digit year.
The last four digits are the serialization digits 0000 to 9999 depending on what number the frame was of the years production.
Falcon Bicycle Serial Numbers Lookup
If the frame was made overseas in Taiwan, it gets more complicated. If the number starts with a K, the frame was made by Kinesis.
That's the only one I remember off the top of my head.
Columbia Bicycle Serial Number Chart
There were at least four companies in Taiwan that made the GT lines :
Robinson, Dyno, Powerlite and Auburn included)
The first digit would be a letter designating the factory that made the frame. There might also be a second letter digit specifying the factory that assembled the bike, if applicable. The model and year of production was also coded by a letter, so you won't be able to spot a two digit month and two digit year.
Before I left, I was writing a specification to standardize all of the serial numbers because GT was starting to send most of its US production to other US fabrication shops.
The information might also come in handy for deciphering other makes because the factories in Taiwan make bikes for a lot of different companies.
I am tinkering around with the idea of starting to make my own frames, kind of on a 'one-off' basis. I am also teaching welding at a local community college.
By the way, did I tell you that the guy ran GT's in house fabrication for the last ten years (he recently retired) was none other than Gilbert Axt. Who? Do you remember Race, Inc.? That was Gilbert.
He also did the original PK Ripper for SE Racing. History, man.
It might be a really cool thing if I can track down Gilbert now and interview him for you.
THAT is the kind of stuff that belongs in the BMX Museum!
Later. I'll write you when I get a chance. Dan Garcia
and here is the updates, thanks to love thegoose! (Michael S)
well we get a good bit of gt serials that could be identified by the owner, if they only had the tips that some of us have learned, so i will post what i know, and anyone with more knowledge can add to it..so here we go.
here is an example to go by. on the dropout you have 'M1' followed by '08922198'..this one is simple.
M1 stands for 'mach one' that is your model gt.
it can also be a 'I' for interceptor and so on.
next on the serial is '0892' this is easy to decode too,
08 means 8th month, which would be august.
then you have '92' next in the lineup, this would be 1992
the last 4 digits, are your build number, this one would be the 2,198th one built.
Here is another example. if your serial is KGCG2297 this one gets a little complicated. but still easy once you learn the code to it.
the first letter is who made the frame itself, in this case it would be 'Kenisis', an overseas company.this could be replaced by another letter but at least we know what that one is there for.
next is the letter 'G'..this isnt always there, but if so, this is where it was assembled, (ever notice the built in usa sticker on your gt or dyno?) this is what that letter is there for. it wasnt made here, but was built here.
next is the letter 'C'..C is the 3rd letter in the alphabet, and march is the 3rd month, so march is the build month.
next is the letter 'G' this is the year. G is the 7th letter in the alphabet,
so this would be a 1987.
here is one more..your serial resembles this:f6030578.
to start, if you have a 'baseball' looking stamp behind your serial, this frame was made overseas...no its not a pacific, so dont cry, or get mad...and lets continue.
on this serial, the first number is the last digit of the year, so 6 stands for 1986
next is '03'....this is the third month..which is march.
so you have a gt built in march of 1986.
but still use the museum as a guide to id the frame, cause sometimes you can find the year, but getting a posotive id on the model isnt possible without knowing which style frame you have.
this doesnt apply to new gt's, but hopefully some people with info on those will chime in. this isnt always going to match your serial, you may have a 'fake'..its not likely but it happens. also on earlier models this can differ. this is for the 2 most popular style serial's i see on here. also, common sense tells you that if you have a suspected 'gt' frame, look it up and compare it in the musuem, knowing which style frame you have will help with the process of id'ing your bike with the serial, especially if the serial has some damage that prevents you from getting the full number.
hopefully this bit of info can be used for everyone, and this will save you from those late nights sitting around waiting for a response to your post looking for an answer to the idendity to your gt...although i do feel smart and proud when i can answer these posts. well, thats it for me, if anyone else has info on serials or if you see a mistake in this guide, tell me so i can edit it. happy holidays people.
| Eddy Merckx branded bicycles have been made by various select builders/manufacturers: Italy's Pela, Masi, Colnago, DeRosa, Britain's Falcon, Belgium's Kessels & Terryn and Japan's Miyata... Then by Eddy Merckx himself in his own workshopwww.eddymerckx.be|
2010 bicycle line catalog cover with vintage Eddy picture
The early years
Worlds Championship jersey and
Eddy Merckx bicycle serial number registry HERE
J Boijen's very interesting Merckx Pista bicycle: made by ?
The Hour Record: History and Controversy
Excerpt from 'La Course en Tête' or 'Head Of the Field',
Eddy opened his own frame building shop in 1980...
L: Eddy and his mentor, Ugo DeRosa R: Views of the Merckx factory
Dean Nixon's very early Eddy Merckx Professional circa 1980 #E239
Scroll down for pictures:
1982 complete pro bike
Early 1980s Merckx made bike, serial #E 5306.
Matthew Simon's Pista # E 9701
Authentic 7-11 bike #A 9816
Back to Classic Rendezvous