Manual Tajima Tmef H 904

Posted : admin On 12/25/2021

Exceeded when using the M-axis manual Or, press the RESET key and then start the machine. Rotation function H position 251 Low oil in the auto lube pump. Add oil to the lubrication tank. 252 The status of the air valve (vacuum) does not Check the air pressure supplied to the air valve.

  1. Tajima User Manual. Embed or link this publication. 2 1990-2001 wilcom wilcom pty ltd a.c.n 001 971 919 146-156 Manual Tajima - Ebook download as PDF File (.pdf), Text file (.txt) or read book online. Free download Manual for tajima pdf or read online and watch manual video on videomanualz.com Where.
  2. Download Free Tajima Tme Hc Tmef User Manual USB READER for Tajima embroidery machine TMFX, TMEX, TMEG, TME-DC, TMEF, TMEF-H. $200.00 + $40.00 shipping Tajima TME-HC 906 power unit - Works good eBay TAJIMA - TMEF-H90 (User Manual) User Manual TAJIMA TMEF-H90 - This User Manual - also called owner's manual or operating instructions - contains.
  3. Tajima TMEF-600: Embroidery Machines: Tajima TMEF-H: Embroidery Machines: Tajima TMEF-S: Embroidery Machines: Tajima TMEF-V: Embroidery Machines: Tajima TMEG-X: Embroidery Machines: Tajima TMEX-C: Embroidery Machines: Tajima TMFD-620: Embroidery Machines: Tajima TMFD-904: Embroidery Machines: Tajima TMFD-904 1204: Embroidery Machines: Tajima.
  4. Tajima TME-HC, TMEF-HC User Manual Instructions (C) 2009-2018 PLR Electronics. There are four kinds of the Tajima TME-HC machine: TME-H: Flat frame, main.

Instructions

(C) 2009-2018 PLR Electronics

Basics

Main buttons (on the bottom left)

  • DISPLAY: Change the information shown on the main screen. (N.SELECT, TAPE CODE, REPEAT, STITCH, ERROR)
  • ORIGIN: Return to the start position. Press ORIGIN, then SET. Make sure home position is programmed.
  • SELECT: To change the color change sequence.
  • REPT: Repeat function.
  • T.CODE: To load a new design.
  • SET: To make a selection.
  • RESET: To cancel errors.

Option buttons (top middle).

  • COORD: To rotate the design. P and one blinking light is normal. Press STEP to change to 45 degree mode (two blinking lights). Press SET to make it stop blinking.
  • A.CHNG: To switch between automatic and manual color change.
  • A.STRT: To turn on automatic start after a color change.
  • FRAME: To allow frame to be moved manually during sewing.
  • D.SET: Press after you have chosen a new design, and have finished with options.

Edit buttons (bottom right)

  • NUMERIC KEYPAD 0-9: Manual color change immediately. Also to insert values.
  • STEP: To browse through menu options
  • C: Clear button.
  • MODE: To change a parameter.
  • ERASE: Used in the memory erase function
  • MRY: Memory Erase button; used in the erase-all function

Main menu list

  • N.SELECT: To show the current automatic color sequence
  • TAPE CODE: To show the loaded design
  • REPEAT: To show the repeat settings
  • STITCH: To show the stitch count. Press C to reset the count.
  • REPEAT: To show the repeat settings
  • ERROR: This menu is shown only when there is an error. Press RESET to clear.
  • ALL LIGHTS: To show the current resize/scale setting.

Status lights

  • STOP P.: Lights up when your main shaft is at the STOP position, marked in RED on the flywheel.
  • JUMP, STOP, END: Lights up when you are at a JUMP code, STOP code, or END code.

Bar switch and button (under table)

  • BAR SWITCH LEFT: Pull bar to the left to stop, or to go back one stitch
  • BAR SWITCH RIGHT: Pull bar to the right to start; same as the green buttons.
  • INCH BUTTON: Inching or Jog button. This is NOT an ATH button.

Frame move

  • ARROW KEYS: Cause the frame to move manually.

Load a new design

1. Press TAPE CODE.
2. Press the 2 key and then press SET.
3. The blinking number is the first empty memory location for your new file.
4. Change this number, or leave it. Press the SET key when done.
5. Press the D.SET key. This will start the download from tape process.
6. Completion! Be sure to set a new offset for this memory location or it will use the old one.

You don’t have a Tape Reader? Purchase a newUSB Readerfor your Tajima TME-HC machine! Look at the front page of PLR Electronics!

Select a design in memory

1. Press TAPE CODE.
2. Press the 5 key and then press SET.
3. Choose a design by typing in the number.
4. Press SET when you have the number you want.
5. If you want to rotate the design, you do it now. Press COORD to rotate, and press SET when done. STEP will change between rotating 90 degrees (one blinking light) or 45 degrees (two blinking lights).
6. Press D.SET to continue with the process.
7. The screen will ask for a resize value. Accept the standard 100% value by pressing SET.
8. Make sure your offset is programmed or cleared, or the frame will move where you don’t expect.
9. To clear offsets, Press MODE, then 4, then SET.
10. Choose a start point with your manual arrow keys. Do NOT press SET again, or that will be the offset.
11. You are ready to start sewing!

Setting color change

1. Press the SELECT button.
2. The first color change will be chosen for editing, and the current color selection is blinking.
3. Press the number keys to choose a new color.
4. Press STEP to confirm, and move to the next color.
5. If the E is blinking, then no color has been chosen yet. Pick a color and press STEP.
6. When you wish to stop, choose a number and press SET instead of STEP.
7. Finished! Don’t forget the automatic color change and auto-start buttons, if you want it to be active.

Erasing design in memory

1. Press MODE, then press 1, then press SET.
2. Press ERASE, then press SET.
3. The top right screen will activate, asking which number to delete.
4. Type in the design to erase with the number pad.
5. Press SET to erase the chosen design.
6. Press MODE when done erasing designs.

Erasing all designs

1. Press MODE, then press 1, then press SET.
2. Press ERASE, then press MRY, then press SET.
3. Wait a few seconds. All designs should now be erased.

Error codes

Press the RESET button to cancel most errors.

  • ERROR E-02, E-03, E-04: Tape data error.
  • ERROR E-06: Memory error. Please clear all memory.
  • ERROR E-08, E-09: Reader error; try again.
  • ERROR E-11: Data set not done correctly. Choose design from beginning.
  • ERROR E-12: Cannot stitch backwards that far.
  • ERROR E-13: Offset problem. Clear offset.
  • ERROR E-16: Memory is empty. Load a design first.
  • ERROR E-17: Memory is full. Clear designs.
  • ERROR E-18: This design is erased. Choose another.
  • ERROR E-19: Memory is full. Clear designs.
  • ERROR E-30, E-31: Stop bar chosen at wrong time.
  • ERROR E-51: Stop position error. Please set main shaft until STOP P. is lit.
  • ERROR E-52: Limit switch. X or Y at the limit; adjust sensors if too small.
  • ERROR E-53: XY Driver problem.
  • ERROR E-54: Limit switch problem.
  • ERROR E-55: Color change motor not moving. Inspect.
  • ERROR E-56: Half-turn cam troble. Check color change.
  • ERROR E-57: Color change needle position error. Check color change.
  • ERROR E-58: Main motor not spinning. Check to see if polarity needs to be reversed on the three phase 220V brake box.
Tajima
Click here for other embroidery machine manuals

(C) 2009-2010 PLR Electronics

Instructions

(C) 2009-2018 PLR Electronics

Basics

Manual Tajima Tmef H 904 Parts

There are four kinds of the Tajima TME-HC machine:

  • TME-H: Flat frame, main motor underneath the control panel. Underneath bar switch.
  • TME-HC: Cap frame, main motor behind the machine. ON/OFF buttons instead of bar switch.
  • TMEF-H: Flat frame, main motor to the far left. Under bar switch.
  • TMEF-HC: Tubular frame, with hydraulic table. ON/OFF buttons instead of bar switch.

Main buttons (on the right)

  • NUMBER PAD: To enter a 1-9 value.
  • NUMBER PAD ARROW KEYS: Overlays the number keys. To manually move the frame, or the hydraulic table.
  • BLUE ARROW KEYS: To move through the menu.
  • +1 and -1: To scroll through submenus, such as the color change sequence.
  • RESET: To cancel errors
  • SET: To make a selection
  • ERASE: Part of the erase design function
  • SEL (SELECT): To scroll through available choices, usually for ON/OFF settings.
  • RESET: To cancel errors.

Main menu list

  • ROW 1, Design Select: To load a design from a Reader, or choose a design from memory.
  • ROW 2, Color Change: To set the color change sequence.
  • ROW 3, Information: To show RPM and number of stitches.
  • ROW 4, Manual Control: To show errors, stop position, and manually control ATH, current needle, and the frame.
  • ROW 5, Maintenance and Editing: To change parameters.

Status lights

  • STOP POSITION: Lights up when your main shaft is at the STOP position, marked in RED on the flywheel. This light is located in ROW 4, Manual Control, POS, next to where it says STOP FACTOR.
  • CURRENT NEEDLE: Shows a number of your current needle position. This number is located in ROW 4, Manual Control, COLOR. Will display C or a backwards C whenever you have gone past the last needle or before the first needle. Will also display if the dipswitches are set for CAP FRAME.

Bar switch and button (under table, certain models only)

  • BAR SWITCH LEFT: Pull bar to the left to stop, or to go back one stitch
  • BAR SWITCH RIGHT: Pull bar to the right to start.

Frame move, ATH, RPM

  • MOVE FRAME: Use the NUMBER PAD ARROW KEYS. Make sure you are first on menu location FRAME, which is in Row 4, Manual Control, FRAME. Press the [5] key to switch between high speed and low speed.
  • IMMEDIATE THREAD TRIM: Make sure you on menu item ATH, which is in Row 4, Manual control. Press 1, then SET.
  • CHANGE R.P.M. SPEED: During stitching, press the NUMBER PAD ARROW KEYS up or down. [8] increases speed, and [2] decreases speed.

Load a new design

1. Move the cursor to the TAPE position, in Row 1, TAPE.
2. Press the 2 key and then press SET.
3. The blinking number is the first empty memory location for your new file.
4. Change this number, or leave it. Press the SET key when done.
5. The rotation option will blink now. It defaults to 1, which is no rotation. Press SET to accept.
6. The scale option will blink now. It defaults to 100 percent. Press SET to accept.
7. The final choice is to start data input from the reader. Press 1 and SET to begin the download process.
8. Completion!

You don’t have a Tape Reader? Purchase a newUSB Readerfor your Tajima TME-HC machine! Look at the front page of PLR Electronics!

Select a design in memory

1. Move the cursor to the TAPE position, in Row 1, TAPE.
2. Press the 5 key and then press SET.
3. The first memory location with a stitch file will display. Type in the desired number, or use the +1 -1 numbers to scroll through the selections.
4. Press the SET key when done selecting.
5. The rotation option will blink now. It defaults to 1, which is no rotation. Press SET to accept.
6. The scale option will blink now. It defaults to 100 percent. Press SET to accept.
7. The final choice is to accept the data. Press 1 and SET.
8. Completion!

Setting color change

1. Move the cursor to the AUTO/MANUAL position, in Row 2, AUTO/MANUAL.
2. The automatic color change light will blink. Automatic mode will blink [0], and manual mode will blink [-].
3. Press the SEL (SELECT) key to switch between automatic and manual mode.
4. Press SET when done. If you have chosen manual, these instructions stop here.
5. The process will start from the first color. Press SET to continue.
6. The needle for the current color will blink. Type in the desired needle number.
7. Press the [+1] key to accept and go to the next color change.
8. If you made a mistake, you can press the [-1] key to go backwards.
9. Repeat the process until all colors are programmed.
10. When finished, then press the SET key immediately after pressing the [+1] key.

Erasing design in memory

1. Move the cursor to the TAPE position, in Row 1, TAPE.
2. Press the 5 key and then press SET.
3. Now choose the design you wish to erase with the number keys.
4. Press ERASE, then press SET.
5. Wait a few moments until completion.

Erasing all designs

1. Move the cursor to the TAPE position, in Row 1, TAPE.
2. Press the 5 key and then press SET.
3. For the design number, choose 0.
4. Press ERASE, then press SET.
5. Wait a minute until completion.

Manual Tajima Tmef H 904 Manual

Tajima Error Codes

Manual Tajima Tmef H 904 Sewing Machine

Press the RESET button to cancel most errors. You may have to change menus to the STOP FACTOR menu.

  • 211: Stop position error. Manually move main shaft until at stop position, or try the ATH operation.
  • 221, 222, 223, 224: Limit switch is tripped. Check position of limit switches compared to the frame’s position. Adjust if needed.
  • 225: Cap frame travel past X limits.
  • 281: Color change timeout. Check the color change motor and mechanicals.
  • 2B1, 2B2, 2B3, 2B4, 2B5, 2B6: Problem with the tape reader. May give several errors, please reset them all before trying the tape reader again.
  • 2B7: Please select design again.
  • 2B9: Memory Error. Try the erase-all-designs function.
  • 2BB: Frame back exceeded. Stop going backwards.
  • 2BC: Please select another design.
  • 2C1: Start button pressed while control panel is busy.
  • 2CD: Design corrupted due to power loss. Reload design.
  • 312: Encoder problem. Check the encoder line.
  • 314: Main shaft not rotating. Check if the RED light on the main motor brake box is lit; if so, reverse two wires in your 3-phase power plug. Check magnetic contactor next to the main power relay.
  • 321: DU-10 XY driver reporting problem. Check if both lights are green, on the DU-10 box.
  • 324: Excessive slowdown during sewing. Lower RPM or check mechanicals or fabric.
  • 325: Cap frame sensor error.
  • 382: Color change motor not moving. Check motor and encoder.
  • 383: Needle position problem. Check color change needle position and manually move to proper position if needed.
  • 384: Encoder problem. Check encoder.
  • 3A2: Thread trimmer problem.
  • 3D3: Computer failure error. Check cabling that nothing is unplugged; reseat cables.

Manual Tajima Tmef H 904 R

Click here for other embroidery machine manuals

(C) 2009-2018 PLR Electronics